Mercedes Benz Door Logo Light Installation: Step-By-Step Guide
Mercedes-Benz is a well-known luxury automobile brand that has been around for over a century. In that time, they've developed a reputation for crafting high-quality vehicles. One of the ways they do this is by incorporating distinctive door logos into their designs.
These logos are often illuminated with LED lights, and it can be challenging to install them correctly. This step-by-step guide will provide you with all the details you need to install these logos correctly. From sourcing the proper hardware to troubleshooting any issues along the way, you'll be able to complete your installation successfully.
What is a Mercedes Benz Door Logo Light?
If you're looking to add a little bit of luxury and sophistication to your car, installing a Mercedes Benz door logo light is an excellent way to do it. Not only will the light look good, but it also serves as a warning indicator to other drivers that you're about to pull out or stop in traffic.
Benefits of the Mercedes Benz Logo Light Installation
The Mercedes Benz logo light installation is a great way to show your brand awareness and attract more customers. The installation is easy, and it does not take long. Here are some benefits of having the logo light installed on your car:
-
You will show your brand awareness and attract more customers.
-
It will make your car look newer and more appealing.
-
The installation is easy and does not take long.
How to Install a Mercedes Benz Door Logo Light
If you own a Mercedes Benz, you know its doors are adorned with beautiful and intricate logos. But what many people don't know is that these logos can also be lit up at night!
Before getting started, it is important to note that your car may have different wiring than ours, so check your owner's manual.
Next, find the light socket near the door handle. It will usually be either on the inside of the door or on the outside near the handle. If it is on the inside, unscrew the lightbulb and remove it from its socket. If it is on the outside, unscrew and remove the cover over the socket. Make sure to note where the new lightbulb goes because you'll need to screw it in place once you've found and replaced your old one!
Now that we've taken care of our socket, it's time to install our new light bulb! First, unscrew the existing bulb from its holder and take off its wrapper. You'll now need to twist off the old base and replace it with the new one. Make sure that both ends of the new base are screwed in tightly against each other so that there is no wobble when you're done!
Finally, screw in your new light bulb and wrap up your installation by replacing your old housing. Don't forget to test out your new logo light by.
Tips for Maintenance of a Door Logo Light
One of the most visible features of a Mercedes Benz is the door logo light. These lights can be a showpiece for your car, but like any other mechanical component, they must be maintained and looked after to keep them performing at their best.
Here are some tips for keeping your door logo light functioning optimally:
- Check the Bulbs: Ensure that the bulbs in your logo light are working correctly. If one or more of the bulbs is not lighting up, it is likely due to an issue with the bulb itself and will need to be replaced.
- Clean the Lens: You should clean the lens inside your logo light once a year with a soft cloth and mild cleaning solution. This will help keep dirt and dust out of the light sensor and promote better lighting performance overall.
- Check for Damaged Cords: Cords connecting your logo light to the car can get damaged over time. If this happens, disconnecting and reconnecting the cord may restore partial or full functionality to your logo light.
- Replace Fuses if Necessary: If you notice that your logo light is not turning on or having intermittent issues with brightness or colour, it may be necessary to replace one or more of the fuses inside the unit.